Robot Refurbishment

Get a like-new robot - for a fraction of the cost: Ship us yours or ​purchase one of ours.

Refurbished Robots offer all the capability and functionality you want, with the value your budget needs.

 

We have refurbished hundreds of Robots from FANUC, ABB, KUKA, Motoman and more. Our experience, facilities and access to parts enables us to deliver a robot that meets all OEM specifications and exceeds your expectations. 

Our Refurbishment Process consists of:

  1. Durability and repeatability testing

  2. A thorough inspection and cleaning

  3. Repair/replacement of any worn or broken mechanical and electrical components*

  4. Bodywork and painting (OEM or custom colors)*

  5. Load testing to ensure all OEM specifications for performance are met

We can refurbish your robot, or sell you one of the many refurbished robots we have in stock. Robot Exchanges available too!

* With approval from the customer.

Track a customer's R-2000iB progress through our refurbishment process:

FANUC R-2000iB Before Refurbishment
This FANUC R-2000iB had seen a good bit of typical use, but was still a good candidate for refurbishment.
FANUC R-2000iB Grease and Metal
The robot was covered in a mixture of grease and metal shavings
FANUC R-2000iB Chipped Paint
Years of wear has chipped and even removed much of the paint.
FANUC R-2000iB Dirty Motors
Every exposed surface is coated in grime. Seems as if this guy has seen some action.
FANUC R-2000iB Worn Dirty Cables
The cabling was worn and the protective coverings were in need of replacing.
FANUC R-2000iB Cleaned and Prepped
Our refurbishment process begins with a thorough cleaning. Once clean, an inspection of all mechanical and electrical components can begin.
FANUC R-2000iB RV
Axis 1 would not meet repeatability specs for backlash. Upon its removal small pieces of the gear assembly were found in the grease. It had to be replaced.
FANUC R-2000iB Ready for Paint
The bodywork is complete and the robot is in the process of being prepped for paint.
FANUC R-2000iB New Motors
All the motors were either replaced, repaired or repainted depending on the condition and need.
FANUC R-2000iB connections
All cable connectors are cleaned and inspected.
FANUC R-2000iB After Refurbishment
With a fresh paint job in the original FANUC yellow – complete with black accents, this robot has a new lease on life. It is almost indistinguishable from a new robot.
FANUC R-2000iB Ready to Ship
Complete with new arm tags and cable covers, the fully refurbished robot has been load tested to ensure it meets all OEM standards and is about to be bolted, banded and shipped back to a happy customer.
Show More

TIE Industrial Corporate Headquarters
1216 Heil Quaker Boulevard
La Vergne, TN 37086
1-888-926-0737

©2019 Copyright TIE Industrial

FANUC R-2000iB Dirty Motors

Every exposed surface is coated in grime. Seems as if this guy has seen some action.